|
|
| Silicone oil is for softening silicone rubbers. Use in small amounts of up to 10 maximum. Levels above 5 may leak out of the cured silicone rubber and effect the lower tear strength. Used as a release agent in latex rubber moulds. Generally diluted with white spirits. |
| |
Material Safety Data Sheet (MSDS)
|
| |
|
|
 |
| Silicone Oil 1kg |
1kg |
$35.50 |
 |
| Silicone Oil 5kg |
5kg |
$129.25 |
|
| Silicone Oil 20kg |
20kg |
$347.50 |
|
| |
| SOLID MOULD 550, BRUSH LATEX |
|
|
| Traditional latex solution used for creating brush applied stretchable rubber sock moulds. Also used in moisture absorbing block plaster moulds to create hollow forms and face masks. |
| |
Technical Data Sheet (TDS)
|
Material Safety Data Sheet (MSDS)
|
| |
|
|
 |
| Solid Mould 550 Brush Latex |
1L |
$20.75 |
|
| Solid Mould 550 Brush Latex |
5L |
$54.25 |
|
| Solid Mould 550 Brush Latex |
20L |
$159.00 |
|
| |
| SOLID MOULD 560, SPRAY LATEX |
|
|
| Natural unthickened latex suitable for spraying or dipping. Suitable as a strippable mask for spray painting. Rapid mould build-up can be achieved by pre-coating a pattern with latex followed by suspension in spray latex. |
| |
Technical Data Sheet (TDS)
|
Material Safety Data Sheet (MSDS)
|
| |
|
|
 |
| Solid Mould 560 Spray Latex |
5L |
$50.00 |
|
| Solid Mould 560 Spray Latex |
20L |
$150.00 |
|
| |
| SUPERIOR MOULDING RUBBERS |
|
Latex Rubber has a high shrink rate compared to silicone rubber in addition cost considerations should be made for
the labour intensive process of building brush up moulds. Silicone Rubbers are overall superior in dimensional stability,
detail reproduction and can be more cost effective. Polyurethane rubber moulds are the best choice for concrete paver moulds.
|
|
: Home :
: Catalogue :
: News and Events :
: Technical Help :
: Contact :
: Legal :
: Links :
© 2005 Solid Solutions, British United Industries (Vic) Pty Ltd East Bentleigh, Melbourne, Victoria, Australia |
|
|
|
|
