Epoxy resin is used in a number of applications that include; Cable Core Block on air core cables in HSJ closures,
Underground Cable Joints, Cable Sheath Seal in existing PVC OJs and Cable Air Seal in pressurised cables. Some information in the STEPS outlined below is specific only to cable core blocking and cable sheath seal applications as follows:

An epoxy low viscosity two part resin filled waterproof encapsulation system. Packaged in an innovative mix pack system.

Upon mixing, the translucent resin tends to be bubble free and able to be safely squeeze poured into a mould or cable enclosure. The cured resin system provides excellent electrical and mechanical properties including thermal cycle and shock resistance. Solid Solutions cable jointing kits have a pedigree history of over 40 years continuous supply to Telstra Australia. Fulfilling the back of their epoxy cable jointing applications. The product has also been extensively used as a splicing kit in the cathodic protection industry.

Telephone line applications include cable core block on air core cable in HSJ closure, cable in HSJ closure, cables sheath seals in existing PVC open joints and cable air seals in pressurised cables

Visit http://www.epoxycablejointing.com/directions.htm for more information. Or simply call Solid Solutions on 03 9579 2044

Silicone grease filled transparent sleeves used in the jointing of conductors in plastic insulated telephone cables. The sleeves are removable being of a plastic straw design, having one end welded closed and the opposite end open for easy slip on and slip off use in protecting and accessing two pair wire connections, Once installed the silicone grease filled plastic sleeve provides excellent corrosion protection from twisted and soldered wire connections.

Telephone Wire Joint Insulator Sleeves, History
Solid Solutions wire joint insulator sleeves have been supplied continuously to Telstra Australia since the early 1960’s. Resulting in millions of installations to this date.