| |
|
|
|
|
| AF216 |
Fibreglass plain weave cloth, 107gsm (grams per square metre). Very tight, smooth weave for general purpose smooth surfacing and model aircraft use. 1.02m wide. |
|
| AF218 |
Fibreglass plain weave cloth, 175gsm (grams per square metre). |
|
| AF219 |
Fibreglass plain weave cloth, 26gsm (grams per square metre). Very soft and very lightweight plain weave surfacing cloth for model aircraft use. 1.04m wide. |
|
| AF251 |
Fibreglass Fabric Open 1 metre Wide. weight 195gm.
Normal Retail Price 10.50 per metre. |
|
| AF252 |
Fibreglass plain weave cloth, 323gsm (grams per square metre). Open weave heavy cloth for general purpose use. 1m wide. |
|
| AF268 |
Fibreglass plain weave cloth, 125gsm (grams per square metre). Open weave. General purpose cloth. 1m wide. |
|
| AF301 |
Fibreglass crowsfoot weave cloth, 185gsm (grams per square metre). Very soft and conformable cloth for aircraft, automotive and high quality general purpose use. 1m wide. |
|
| AF306 |
Fibreglass crowsfoot weave cloth, 107gsm (grams per square metre). Lightweight, conformable cloth for aircraft, automotive and high quality general purpose use. 965mm wide. |
|
| AK502 |
Crowsfoot 178gm 1 meter wide. Normal retail price $36.50 per metre. |
|
| Aluminium grain |
Medium size Aluminium grain, ideal for extending resin system to lower internal reaction heat. Good for larger mass casting work. |
|
| AT314 |
Fiberglass 155gm Tape 100 metre wide. Normal retail price $1.65 per metre. |
|
| Boral Casting Plaster |
Regular economic white plaster. Recommended for general purpose moulding, casting and pattern making. Casting details can be improved by adding Hydrostone at 30%. |
|
| BSN Medical Gypsona Plaster Bandage |
Plaster impregnated bandage. Sets fast and can be accelerated with warm water. Recommended for reinforcing alginate life moulds and for general reinforcement of flexible mould materials. |
|
| Candle Wax |
Candle wax melts at 68ºC degrees and is suitable for making figurine candles with low to medium relief. |
|
| Carbon Fibre Cloth |
1070mm Wide x 200gsm Carbon Fibre Cloth. Very stiff and lightweight, high performance laminating fabric for aircraft, automotive & model aircraft use. |
|
| Chopped Strand Mat 225G |
Chopped strand mat (CSM). Emulsion bound mat for reinforcing polyester resin panels, moulds and general purpose repairs. Ideal as a first layer over detailed shapes. 1 metre wide.
BULK QUANTITY DISCOUNTS - 25 to 49 Metres 5%, 50 to 99 Metres 10%, 100 metre rolls 37%. |
|
| Chopped Strand Mat 300G |
Chopped strand mat (CSM). Emulsion bound mat for reinforcing polyester resin panels, moulds and general purpose repairs. General purpose mat suited to most application as a first layer or for full construction. 1 metre wide.
BULK QUANTITY DISCOUNTS - 25 to 49 Metres 5%, 50 to 99 Metres 10%, 100 metre rolls 37%. |
|
| Chopped Strand Mat 450G |
Chopped strand mat (CSM). Emulsion bound mat for reinforcing polyester resin panels, moulds and general purpose repairs. Generally used as a backup layer over lighter weight CSM moulds. 1 metre wide.
BULK QUANTITY DISCOUNTS - 25 to 49 Metres 5%, 50 to 99 Metres 10%, 100 metre rolls 37%. |
|
| Chopped Strand Mat 600G |
Chopped strand mat(CSM). Emulsion bound mat for reinforcing polyester resin panels, moulds and general purpose repairs. Heavy tough layer of CSM for adding strength to structures. 1 metre wide.
BULK QUANTITY DISCOUNTS - 25 to 49 Metres 5%, 50 to 99 Metres 10%, 100 metre rolls 37%. |
|
| Concrete mould release 600 |
A specialist concrete mould release developed for the manufacture of complex concrete shapes.S Mould Oil will not attack materials normally employed in the manufacture of moulds or formwork. |
|
| Digital Scales with Glass Tabletop - GK5001 |
This simple to use digital scale has a maximum capacity of 5kg / 11 lbs, measuring in 1g / 0.1oz increments. Includes batteries and add on bowl.
• ON/OFF/TARE/UNIT
• Max capacity 5kg / 11 lbs
• Measures in 1g / 0.1oz increments
• Over-load indication
• Low-battery indication
• Easy-clean, tempered glass platform
• Powered by 2x CR2032 Lithium battery (included)
• CE approved
• Shipping weight (approx) 0.7kg
• Dimensions (approx):
Digital scale 165mm width x 195mm length x 45mm depth
Plastic bowl 180mm diameter x 60mm depth
|
|
| E 654-B951 |
Cold cure two components Polyether/MDI elastomer. Specially designed for production of precast patterned concrete moulds. |
|
| Epoxy Resin 375 |
Tough iron filled epoxy casting resin system with good dimensional stability. Ideal for economical pattern making.
This is NOT A STOCK LINE. Made to paid order only. |
|
| Erapol CC5/65 |
A tough polyurethane rubber ideal for concrete mould making. |
|
| Fibreglass Tapes |
Plain weave tape, 155g, Fibreglass 200mm. Open weave for edge reinforcing and joining panels. |
|
| Foam Form 20 |
Low density closed cell foam. Fast cure time and flame retardant. Recommended for buoyancy applications and for filling cavities. 25:1 expansion. |
|
| Foam Sheet 100mm Thick. |
Butt edging foam sheet,suitable for residential / agriculture, wall cladding insulation, panels cores, fabrication, modelmaking and surfcraft. Outstanding insulation properties. Long term insulation properties not affected by dust, moisture or settling.
A cutting charge of $5.00 per cut applies where a sheet is requested to be cut.
Half and Full sheets CANNOT be delivered. They are only available for pick up at our shop located at 15 Ardena Court, East Bentleigh, Victoria.
Full packs CAN BE delivered within the Melbourne Metropolitan area only, for a minimum delivery charge of $110.00. This charge covers one pack and up to twelve packs. |
|
| Foam Sheet 12.7mm Thick. |
Suitable for residential / agriculture, wall cladding insulation, panels cores, fabrication, modelmaking and surfcraft. Outstanding insulation properties. Long term insulation properties not affected by dust, moisture or settling. Butt edging.
A cutting charge of $5.00 per cut applies where a sheet is requested to be cut.
Half and Full sheets CANNOT be delivered. They are only available for pick up at our shop located at 15 Ardena Court, East Bentleigh, Victoria.
Full packs CAN BE delivered within the Melbourne Metropolitan area only, for a minimum delivery charge of $110.00. This charge covers one pack and up to twelve packs. |
|
| Foam Sheet 150mm Thick. |
Suitable for residential / agriculture, wall cladding insulation, panels cores, fabrication, modelmaking and surfcraft. Outstanding insulation properties. Long term insulation properties not affected by dust, moisture or settling. Butt edging.
A cutting charge of $5.00 per cut applies where a sheet is requested to be cut.
Half and Full sheets CANNOT be delivered. They are only available for pick up at our shop located at 15 Ardena Court, East Bentleigh, Victoria.
Full packs CAN BE delivered within the Melbourne Metropolitan area only, for a minimum delivery charge of $110.00. This charge covers one pack and up to twelve packs. |
|
| Foam Sheet 25mm Thick. |
Suitable for residential / agriculture, wall cladding insulation, panels cores, fabrication, modelmaking and surfcraft. Outstanding insulation properties. Long term insulation properties not affected by dust, moisture or settling. Tongue and Groove edging.
A cutting charge of $5.00 per cut applies where a sheet is requested to be cut.
Half and Full sheets CANNOT be delivered. They are only available for pick up at our shop located at 15 Ardena Court, East Bentleigh, Victoria.
Full packs CAN BE delivered within the Melbourne Metropolitan area only, for a minimum delivery charge of $110.00. This charge covers one pack and up to twelve packs. |
|
| Foam Sheet 30mm Thick. |
Suitable for residential / agriculture, wall cladding insulation, panels cores, fabrication, modelmaking and surfcraft. Outstanding insulation properties. Long term insulation properties not affected by dust, moisture or settling. Tongue and Groove edging.
A cutting charge of $5.00 per cut applies where a sheet is requested to be cut.
Half and Full sheets CANNOT be delivered. They are only available for pick up at our shop located at 15 Ardena Court, East Bentleigh, Victoria.
Full packs CAN BE delivered within the Melbourne Metropolitan area only, for a minimum delivery charge of $110.00. This charge covers one pack and up to twelve packs. |
|
| Foam Sheet 50mm Thick. |
Suitable for residential / agriculture, wall cladding insulation, panels cores, fabrication, modelmaking and surfcraft. Outstanding insulation properties. Long term insulation properties not affected by dust, moisture or settling. Tongue and Groove edging.
A cutting charge of $5.00 per cut applies where a sheet is requested to be cut.
Half and Full sheets CANNOT be delivered. They are only available for pick up at our shop located at 15 Ardena Court, East Bentleigh, Victoria.
Full packs CAN BE delivered within the Melbourne Metropolitan area only, for a minimum delivery charge of $110.00. This charge covers one pack and up to twelve packs. |
|
| Foam Sheet 75mm Thick. |
Suitable for residential / agriculture, wall cladding insulation, panels cores, fabrication, modelmaking and surfcraft. Outstanding insulation properties. Long term insulation properties not affected by dust, moisture or settling. Butt edging.
A cutting charge of $5.00 per cut applies where a sheet is requested to be cut.
Half and Full sheets CANNOT be delivered. They are only available for pick up at our shop located at 15 Ardena Court, East Bentleigh, Victoria.
Full packs CAN BE delivered within the Melbourne Metropolitan area only, for a minimum delivery charge of $110.00. This charge covers one pack and up to twelve packs. |
|
| Formasil Xact Putty & Activator |
Formasil Xact is a two part silicon-based, precision moulding putty. Due to it’s soft initial consistency, the material can be shaped and pressed over an object to make a plaque mould in around 10 minutes. |
|
| FRP PLP1 |
General purpose carnauba paste wax which produces excellent gloss and gelcoat compatibility. Essential for breaking in new fibreglass moulds in conjunction with PVA release agent. |
|
| Klean Klay |
Non hardening, sulphur free cream modeling clay ideally suited to silicone mould making. Smooth firm consistency which holds its shape, yet pliable and easy to shape. |
|
| Kromalgin Alginate |
Moulding rubber Alginate suitable for using against the human body. Sets in 3 minutes with colour changes during cure. Safe to use against skin and peels off without removing hair. |
|
| Measuring Beakers |
Translucent calibrated measuring beakers with good release of cured materials. 100ml, 250ml, 500ml and 1 litre. |
|
| Metal Alloy JA6 |
Lead free alloy similar to Britannia Pewter, casts a bright silver colour. Suitable for tankards, goblets and food utensils. Strong enough for rings, general jewellery and small belt buckles. Surface finish can be left or readily oxidised. |
|
| OC 60 |
A tough flexible clear polyurethane of 60 shore hardness. |
|
| OC45A Urethane Elastomer |
OC45A is a two-component, water clear polyurethane that cures at room temperature to produce a 25 Shore A elastomer. This material when cured at 25oC will take longer than 24 hours to reach 25 Shore A. The material can be cured for 2 - 4 hours at 35-40oC to speed up the cure. |
|
| P300LN |
Tissue, 26g. Lightweight fibreglass tissue for reducing glass pattern on exposed laminates and solid plaster wall patching. 1m wide. |
|
| Pacer PT15 Zip Kicker |
Accelerator forcing immediate cure of all super glues. Expands gap filling ability and permits structural fillet forming. Comes in a pump spray pack for easy application. 56.7ml 2oz |
|
| Pol-Ease 2300 |
Silicone based mould release for urethane elastomers, rigid and semi rigid urethane foam and epoxies. Premium performance fitted with ultra firm mist nozzel. |
|
| Polyester Flowcoat |
Thickeneded polyester coating for finishing exposed laminates with an attractive surface finish. Neutral in colour, can be tinted to colour. |
|
| Polyester Gelcoat Ortho |
Brushable, neutral colour polyester gelcoat for in-mould use only. Gives high quality finish to demoulded parts with good chemical/water resistance, gloss retention, weatherability and resilience. Can be coloured with pigment paste. |
|
| Polyfoam R-8 |
PolyFoam R-8 is a rigid self-skinning foam for creating 10-20 lb/cubic foot density parts that replicate lightweight materials such as wood. |
|
| Polytek Easy Flo 60 |
Super low viscosity casting polyurethane that pours like water and sets rapidly. Easy Flo 60's extremely low viscosity gives excellent detail penetration and the most bubble free casting without employing vacuum degassing and pressure casting techniques. Can be coloured using Dynamic pigment pastes. Rapid demould makes Easy Flo ideal for high volume fast cast applications such as, miniatures, models, and dress jewellery. |
|
| Polytek Hydrogel N |
Dry,white powder that when mixed with water at a 3 to 1 yields a creamy mix with a 5 minute working time. Demolding can be done, with care, 2 to 3 minutes after mix can no longer be worked. |
|
| Polytek Mould Making & Casting DVD |
Advancing the State-of-the-Art in Art & Industry.
Mould making demonstrations. See how to make a
Poured Block Mould, Brushed Blanket Mould, or a Poured Blanket Mould.
Let Polytek show you how they can help with casting Concrete, Plaster, Wax, Foams or Resins. |
|
| Polytek PlastiFlex |
Innovative flexible plastic for architectural moldings that bend, props and more. |
|
| Polytek PlatSil 71-20 |
Platsil 71-20 is 20 shore A in hardness. Platsil 71 series RTV silicone rubbers are two-component, addition-cure, platinum-catalyzed, high tear strength, flexible mold compounds. They are tough, and have good tear strength, which make them especially valuable to the mold making industry. They are recommended as mold materials for polyester, epoxy, polyurethane resins, waxes and many other materials. Superior to condensation cure or tin cure silicone rubber offering higher chemical resistance and improved dimensional stability. |
|
| Polytek PlatSil 71-40 |
PlatSil 71-40 is 40 shore A in hardness. Platsil 71 Series RTV silicone rubbers are two-component, addition-cure, platinum-catalyzed, high tear strength, flexible mold compounds. They are tough, and have good tear strength, which make them especially valuable to the mold making industry. They are recommended as mold materials for polyester, epoxy, polyurethane resins, waxes and many other materials. Superior to condensation cure or tin cure silicone rubber offering higher chemical resistance and improved dimensional stability. |
|
| Polytek Platsil Gel-10 |
PlatSil Gel-10 is a versatile 1:1 mix silicone rubber that cures in 30 minutes to a soft shore A-10 hardness for making molds or for special effects purposes such creating animatronic skins or silicone rubber appliances. When used with up to 250% Smith's Theatrical Prosthetic Deadener, PlatSil Gel-10 can be made to simulate human tissue. This rubber can be accelerated for a more rapid cure, retarded for a slower cure, thickened with a liquid additive for brushing, or softened to obtain a lower Shore A hardness. |
|
| Polytek Poly 15 Part F Foamer |
Liquid additive for foaming Polyurethanes. Foams created with Part F do not have skins but are useful for filling spaces with less resin than would be required if poured solid. |
|
| Polytek Poly 15-12 |
Poly 15-12 - Rigid casting polyurethane for production of transparent parts or for pigmented colour castings. Use for producing decorative objects and parts. For bubble-free, rigid castings, best results are obtained with the use of vacuum and/or pressure. Poly 15-12 may be used for cold cast bronze or other application with dry fillers. For applications requiring long term non yellowing use Poly-optic 14 Series water clear rigid polyurethanes. |
|
| Polytek Poly 15-8 |
Poly 158 - Aluminium filled polyurethane. Easily poured casting system with good thermal conductivity and heat resistance plus accurate dimensional stability. Used for tools, models, patterns, fixtures, duplicate masters, vacuum forming moulds and general tooling use. |
|
| Polytek Poly 74-20 |
Moulding rubber with high strength and flexibility 20 A shore hardness. Used for making durable easy releasing moulds for casting plasters and waxes without release agents, also excellent for casting cement, epoxy, polyester, urethane and acrylic with proper release agents. Additives are available to modify cure rate, hardness and standard physical properties. |
|
| Polytek Poly 74-30 |
Poly 74 and 75 Series Liquid Rubbers consist
of Part A and Part B that, after mixing, cure overnight at room temperature to flexible, high strength, mold rubbers. Poly 74 and 75 Series Rubbers make durable, easy releasing molds for casting plasters and waxes without release agents, but when used with proper release agents are also excellent for casting cement, epoxy, polyester, urethane and acrylic. |
|
| Polytek Poly 74-45 |
Moulding rubber with high strength and flexibility 45 A shore hardness. Used for making durable easy releasing moulds for casting plasters and waxes without release agents. Also excellent for casting cement, epoxy, polyester, urethane and acrylic with proper release agents. Additives are available to modify cure rate, thickness hardness and standard physical properties. |
|
| Polytek Poly 74-55 |
Moulding rubber with high strength and flexibility 55 A shore hardness. Used for making durable easy releasing moulds for casting plasters and waxes without release agents. Also excellent for casting cement, epoxy, polyester, urethane and acrylic with proper release agents. Additives are available to modify cure rate, thickness hardness and standard physical properties. |
|
| Polytek Poly 74-75 Part C Softener |
Softener - For the Poly 74 and 75 Series RTV Liquid Mold Rubbers, Poly 74/75 Part C Softener can be added to the uncured products for a lower viscosity mix and a softer cured rubber.
When Part C is used, cure time is longer and there is some loss of strength in the rubber and increased tendency to shrink after repeated castings. To soften Poly 74-30 to a Shore A15, mix 1A:1B:1C, by weight. The quantity of Part C required to soften other products varies and should be determined through experimentation. |
|
| Polytek Poly 74/75 Part X Accelerator |
Add to Poly 74 or 75 Series Polyurethanes to accelerate the cure. Part X is most useful when making brush-on moulds to decrease the time needed between coats. |
|
| Polytek Poly 75-75 |
Poly 75-75 - Moulding rubbers with high strength and flexibility. Used for making durable easy releasing moulds for casting plasters and waxes without release agents. Also excellent for casting cement, epoxy, polyester, urethane and acrylic with proper release agents. Brush or trowel on versions of these rubbers can be produced by the additions of Aerosil 200. Additives are available to modify cure rate, thickness, and hardness and standard physical properties. |
|
| Polytek Poly 81-90 |
Tough durable polyurethane rubber of 90 shore A hardness . Typical applications are mould facings forming tools, industrial parts, rollers, electrical potting and encapsulation gaskets, engine mounts, pads and bumpers. |
|
| Polytek Poly Clear Cut 45 |
This rubber consists of two parts that after mixing cure at room temperature to a flexible, clear rubber. Poly ClearCut 45 is designed for making clear moulds that can be easily cut away from original objects with less chance of damage and better seam positioning. Also perfect as a material for fun flexible objects such as jewellery. Colours can be added to the liquid rubber to make a tinted or coloured, yet still clear, rubber. |
|
| Polytek Poly Latex 60 |
Poly Latex 60 is a one-part, brush-on liquid which after multiple coats, drying between each coat, is built up to 1.5mm to 3.5mm thick to form a tough rubber blanket mold, often used for casting plaster, concrete and limited casting with some resins. Should be stored above 18 degress Celsius. |
|
| Polytek Poly-Optic 1410 Rigid Urethane Kit |
Poly-Optic Resins are two component, water clear, polyurethane casting systems, formulated specifically for application where optical clarity is a must. Their low viscosities and long pot lives allow easy degassing and handling. Selected dyes may be added to each system to obtain clear, coloured castings. All work with Poly-Optics must be done with vacuum and/or pressure in a warm environment. We do not recommend attempting to use Poly-Optic without vacuum or pressure or in an environment below 23.3ºC as poor cures with bubbles may result. |
|
| Polytek Poly-Optic Catalyst 14X |
A powerful catalyst to increase the speed of curing for Poly-Optic resins. For best results, mix Parts A and B, degas if required, then add Part 14X and degas again if necessary. Half a percent speeds the cure significantly. |
|
| Polytek Polycolor Dyes |
Clear liquid dyes for colouring transparent epoxy resins and polyurethane systems. 1 generous drop is sufficient to pigment 1 litre. |
|
| Polytek Polyfoam F5 Kit |
PolyFoam F-5 is a flexible self-skinning foam for creating soft parts, props, display items and more. |
|
| Polytek PolyPurge |
Dry Gas Blanket
Extends the shelf life of Polyurethane products
Non-Flammable 100% active drying agent.
Does NOT contain CFC solvents or propellants. |
|
| Polytek PolyPurge |
Dry gas blanket. Extends the shelf life of
Polyurethane products. Non-Flammable, 100% active drying agent.
Does NOT contain CFC solvents or propellants. |
|
| Polytek Tinsil 70-30 |
TinSil 70 Series mold rubbers are tin-catalyzed, condensation-cure systems. They are ideal for molds where easy release or high temperature resistance is needed. They are recommended as mold materials for polyester, epoxy and polyurethane resins and waxes. Tinsil 70-30 is a white 30 shore A rubber. |
|
| Polytek TinSil Additives |
Polytek offers various additives that can be used to vary the properties of the cured and uncured Poly-Silicone rubbers. |
|
| PT02 Zap a Gap-CA 28g (1oz) |
Gap filling formula adhesive. Bonds virtually anything including wood veneers, rubber, leather and plastics. Will work on oily surfaces. |
|
| Q Cel 520 |
Lightweight extender for resins. High loadings can be made without a thickening effect. Increases hardness and density. Easy to sand. |
|
| Resin Jewelry Handbook by Kathie Murphy |
The Jewelry Handbook serves as an introduction to assorted topics and techniques relating to making the latest design jewelry using various resins. The book is aimed at the student or the experienced jeweler who is experimenting in new areas. |
|
| Resin Jewelry Handbook by Kathie Murphy |
The Jewelry Handbook series serves as an introduction to various topics and techniques in making jewellery using polyester resins. The books are aimed at both the student and the experienced jeweler who is experimenting in a new area. 128 Pages, full colour gloss. |
|
| Rhodia Accelerant PC36 |
An accelerator to increase the cure time for Rhodia 585 silicone rubber and other tin or condensation cure silicone rubbers. |
|
| Silicone Filled Tubes Blue |
Silicone grease filled transparent sleeves used in the jointing of conductors in plastic insulated telephone cables. The sleeves are removable being of a plastic straw design, having one end welded closed and the opposite end open for easy slip on and slip off use in protecting and accessing two pair wire connections, Once installed the silicone grease filled plastic sleeve provides excellent corrosion protection from twisted and soldered wire connections.
Telephone Wire Joint Insulator Sleeves, History
Solid Solutions wire joint insulator sleeves have been supplied continuously to Telstra Australia since the early 1960’s. Resulting in millions of installations to this date.
INTERNAL DIAMETER 1.75 mm.
LENGTH Approximately 58mm. |
|
| Silicone Filled Tubes Brown |
Silicone grease filled transparent sleeves used in the jointing of conductors in plastic insulated telephone cables. The sleeves are removable being of a plastic straw design, having one end welded closed and the opposite end open for easy slip on and slip off use in protecting and accessing two pair wire connections, Once installed the silicone grease filled plastic sleeve provides excellent corrosion protection from twisted and soldered wire connections.
Telephone Wire Joint Insulator Sleeves, History
Solid Solutions wire joint insulator sleeves have been supplied continuously to Telstra Australia since the early 1960’s. Resulting in millions of installations to this date.
INTERNAL DIAMETER: 2.87mm
LENGTH: Approximately 58mm
|
|
| Silicone Filled Tubes Green |
Silicone grease filled transparent sleeves used in the jointing of conductors in plastic insulated telephone cables. The sleeves are removable being of a plastic straw design, having one end welded closed and the opposite end open for easy slip on and slip off use in protecting and accessing two pair wire connections, Once installed the silicone grease filled plastic sleeve provides excellent corrosion protection from twisted and soldered wire connections.
Telephone Wire Joint Insulator Sleeves, History
Solid Solutions wire joint insulator sleeves have been supplied continuously to Telstra Australia since the early 1960’s. Resulting in millions of installations to this date.
INTERNAL DIAMETER: 8.00 mm
LENGTH: Approximately 58mm
|
|
| Silicone Filled Tubes Orange |
Silicone grease filled transparent sleeves used in the jointing of conductors in plastic insulated telephone cables. The sleeves are removable being of a plastic straw design, having one end welded closed and the opposite end open for easy slip on and slip off use in protecting and accessing two pair wire connections, Once installed the silicone grease filled plastic sleeve provides excellent corrosion protection from twisted and soldered wire connections.
Telephone Wire Joint Insulator Sleeves, History
Solid Solutions wire joint insulator sleeves have been supplied continuously to Telstra Australia since the early 1960’s. Resulting in millions of installations to this date.
INTERNAL DIAMETER: 2.12 mm
LENGTH:Approximately 58mm
|
|
| Smith’s Theatrical Prosthetic Deadener |
Add up to 250% of Smith’s Deadener to the Gel-10 mix weight (A+B) to create super soft gel-like, self-sticking prosthetics or gel-filled appliances. Add Smith’s Deadener to Platsil gel-10 Liquid Rubber to lower its cured hardness and remove synthetic qualities inherent in the silicon rubber. Add by weight up to 250% Smith’s Deadener to mixed Platsil Gel-10 to create a chemically stable gel with the look and feel you desire. |
|
| Solid Bond 300 Gel Epoxy Adhesive |
Non-sagging, gel like fully translucent, waterproof epoxy adhesive. Suitable for year round use. Sets to 5ºC Ideal for bonding wood, metals, masonry and ceramics. Bridges gaps up to 10mm or squeeze down to a clear glue line for wood laminating. |
|
| Solid Bond 305, 5 Minute Epoxy Glue |
Handy fast setting glue that produces a strong water resistant bond. Recommended for gluing timber, fibreglass and metals, in low stress applications. Use in conjunction with applications of 4 Seasons Epoxy Adhesive 151 as a pinning glue allowing the stronger, fully waterproof 4 Seasons Epoxy Adhesive 151 to set off. |
|
| Solid Cast 609, Flexible Glaze Epoxy |
Tough, flexible, water clear, self levelling, glass like epoxy coating system. Recommended for decoupage and coating wood, photographs and large surface areas. |
|
| Solid Cast 650 |
Ideal for jewellery casting. Easily poured low viscosity clear casting system with good thermal conductivity and heat resistance plus accurate dimensional stability. Used for dress jewellery, tools, models, patterns, fixtures, duplicate masters, vacuum forming moulds and general tooling use. |
|
| Solid Cast 650 |
Ideal for jewellery casting. Easily poured low viscosity clear casting system with good thermal conductivity and heat resistance plus accurate dimensional stability. Used for dress jewellery, tools, models, patterns, fixtures, duplicate masters, vacuum forming moulds and general tooling use. |
|
| Solid Cast 651, Universal Epoxy Potting Resin |
Tough, low viscosity thin amber coloured epoxy potting system. Recommended for electrical potting and encapsulation and ten pin ball plugging. Suitable for larger casting work when extended with filler to lower exotherm. Can be coloured with Dynamic pigment pastes. |
|
| Solid Cast 660 |
Super low viscosity casting polyurethane that pours like water and sets rapidly. Solid Cast 660's extremely low viscosity gives excellent detail penetration and the most bubble free casting without employing vacuum degassing and pressure casting techniques. Can be coloured using Dynamic pigment pastes. Rapid demould makes Easy Flo ideal for high volume fast cast applications such as, miniatures, models, and dress jewellery. Easy to use, 2 equal parts by volume, 4 minutes work time, sets in approximately 20-30 minutes. |
|
| Solid Cast 670 |
Solid Cast 670 is useful when longer working time is needed to complete a pour, but thin parts require a longer demould time to develop hardness. Moulds used to cast thin parts with Solid Cast 670 may need to be preheated ( 100-120ºC ). |
|
| Solid Cast 680 |
Unique polyurethane specifically made for rotational casting or slush casting to create tough hollow parts. Thin-walled castings made from Solid Cast 680 have surprising strength without the usual brittleness of hollow polyurethane castings. |
|
| Solid Solutions Acetone |
Clean up solvent for use with polyester based products. Excellent surface cleaner for fibreglass work. |
|
| Solid Solutions Brush Latex |
Traditional latex solution used for brushing build-up of rubber sock stretchable moulds. Also used in moisture absorbing block plaster moulds to create hollow masks. |
|
| Solid Solutions Cable Jointing Resin (Black) |
Tough, low viscosity thin black epoxy potting system. Recommended for electrical potting and encapsulation and ten pin ball plugging. Suitable for casting work but is best extend with filler to lower exotherm. Excellent product for cable jointing purposes. |
|
| Solid Solutions Epoxy Cast 306 |
Epoxy resin system with a low viscosity, excellent clarity and lensing effects plus extended working time. Ideal for clear block embedding, badge coating and dress jewellery manufacturing. |
|
| Solid Solutions Epoxy Potting Resin 500 |
Epoxy resin system used by Telstra for over 40 years in a number of applications that include; Cable Core Block on air core cables in HSJ closures,
Underground Cable Joints, Cable Sheath Seal in existing PVC OJs and Cable Air Seal in pressurised cables. Some information in the STEPS outlined below is specific only to cable core blocking and cable sheath seal applications as follows:
An epoxy low viscosity two part resin filled waterproof encapsulation system. Packaged in an innovative mix pack system or available in bulk packs.
Upon mixing, the translucent resin tends to be bubble free and able to be safely squeeze poured into a mould or cable enclosure. The cured resin system provides excellent electrical and mechanical properties including thermal cycle and shock resistance. The product has also been extensively used as a splicing kit in the cathodic protection industry.
Telephone line applications include cable core block on air core cable in HSJ closure, cable in HSJ closure, cables sheath seals in existing PVC open joints and cable air seals in pressurised cables
Visit http://www.epoxycablejointing.com/directions.htm for more information. Or simply email sales@solidsolutions.com.au
|
|
| Solid Solutions Fibreglassing Resin 475 |
Low viscosity, medium to fast curing polyester resin. Minimal drainage, pre-promoted, low styrene emission and with colour change indicator. Low shrinkage, resilient and good mechanical properties. Suitable for general fibreglassing work. |
|
| Solid Solutions HR50 Urethane Foam |
Soft, high resilience foam. Cures quickly. Recommended for resilient cushioning, make-up applications, puppets and prosthetic components and foaming in latex skins. |
|
| Solid Solutions ISF 100 Integral Skin Foam |
ISF100 is a non-CFC Integral Skin Polyurethane Foam product with a free rise density of 100 kg/m3.
The system is designed for articles which are sensitive to light pigmented colours. This system is also suitable for mouldings such as bicycle seats; bump stops, armrests, headrests and any articles where skinned foam is required.
The system can be hand mixed and/or processed through a plural component polyurethane dispensing machine. |
|
| Solid Solutions Lots-A-Lures Fishing Lure Making |
Have fun and save money making your own fishing lures. Contains everything for making fishing lure moulds and then casting your own fishing lures. Produces approximately 100 regular sized lures. Paints and hooks are not included. Ideal gift for the fisherman. |
|
| Solid Solutions MEKP Polyester Catalyst |
Methyl Ethyl Ketone Peroxide, Catalyst for polyester fibreglassing resin, gelcoat and flow coat. Used at around 2% for laminating and at around 1% for most embedding work. Note: 3 months shelf life only. |
|
| Solid Solutions MEKP Polyester Catalyst |
Methyl Ethyl Ketone Peroxide, Catalyst for polyester fibreglassing resin, gelcoat and flow coat. Used at around 2% for laminating and at around 1% for most embedding work. Note: 3 months shelf life only. |
|
| Solid Solutions Noah`s Ark Animal Shampoo |
Premium grade concentrated animal shampoo, ideal for use on all animals great and small, from cats to cattle and hounds to horses. Long been the choice of breeders for the showing of animals. Noah's Ark animal shampoo has no added phosphates and contains natural herbal essence. |
|
| Solid Solutions Plasticine |
White, general purpose medium hard oil based clay. Smooth with alcohol, turpentine or similar solvents. Safe for use with silicone rubbers. Recommended for modelling, general sculptural work and mould making, for walls, bases and dams. |
|
| Solid Solutions Polyester Tooling Gelcoat |
Orange tooling gelcoat formulated for use in the production of polyester fibreglass moulds. Ideal for the production of moulds and masters where a high tough strength film, resistant to cracking and capable of holding a high gloss is desired. Higher heat distortion temperature than standard gelcoat. |
|
| Solid Solutions Precious Impressions Baby Hand Kit (Carry Bag) |
Forever preserve and cherish the memory of your baby's tiny hand or foot with the Creative DIY Solutions Precious Impressions baby hand moulding kit. This carry bag version is more suited to users buying the kit for their own use. We strongly encourage buyers to consider the boxed gift version for special occasions or gifts. |
|
| Solid Solutions Precious Impressions Baby Hand Kit (Gift Box) |
With the Precious Impression baby casting kit you can preserve forever the memory of your baby's tiny hand or foot. The kit contains everything you need to start moulding your very own life size 3D replication of your baby's hand or foot. You will be amazed at the level of detail captured in your casting. This kit is ideal as a gift pack for new born babies, wedding gifts, birthdays and Christmas or that special occasion. |
|
| Solid Solutions PVA |
Alcohol based, water soluble and water clean-up. used as a release agent for polyester resins over wax polished moulds. |
|
| Solid Solutions Solid Mould 500 Silicone Rubber, Formerly Ace 500 |
Solid Mould 500 is a minimal shrinkage condensation cure silicone moulding rubber. The cured rubber provides high flexibility and tear strength with 25 shore A hardness. Catalyst choice enables a minimal demould time of 3 to 4 hours or a working time of up to 40 minutes for large pours.
APPLICATIONS
Suitable for making delicate intricate impression moulds through to large architectural concrete moulds. Ideal for fine detailed moulds used in conjunction with Solid Cast 660 Fast Set Polyurethane for producing plastic models, figurines, jewellery and prototype parts. Solid Mould 500 is suited to larger moulding and casting work used in conjunction with concrete or plaster to produce figurines, gardenware and precast building elements.
Add 2% Catalyst by weight. Or add 1% by weight to slow cure or 3% by weight to Accelerate cure 0.5% Shrinkage on large scale moulds.
Further volume discounts available. |
|
| Solid Solutions Spray Latex |
Natural unthickened latex suitable for spraying or dipping. Suitable as a strippable mask for spray painting. Rapid mould build-up can be achieved by pre-coating a pattern with latex followed by suspension in spray latex. |
|
| Solid Solutions Victory Brown Wax MKII |
Firm brown, micro-crystalline modelling wax. Used for sculpture modelling or casting waxes for investment casting. At low temperatures Victory Brown Mk2 remains flexible. Melting point approx 79ºC |
|
| Super Sculpey Modelling Clay |
Ceramic like, sculpting compound, safe for use with sliicone rubber. Soft and pliable and able to be shaped and tooled. After baking it becomes hard and chip resistant. Can be carved, sanded and drilled. Accepts paints and glazing. |
|
| Syringe |
Chemical resistant, clear calibrated plastic disposable syringes. For measuring small volumes. |
|
| Syringes |
Chemical resistant, clear calibrated plastic disposable syringes. For measuring small volumes. |
|
| Telecommunications Epoxy Resin Cable joining Kit 180gm |
Epoxy resin is used in a number of applications that include; Cable Core Block on air core cables in HSJ closures,
Underground Cable Joints, Cable Sheath Seal in existing PVC OJs and Cable Air Seal in pressurised cables. Some information in the STEPS outlined below is specific only to cable core blocking and cable sheath seal applications as follows:
An epoxy low viscosity two part resin filled waterproof encapsulation system. Packaged in an innovative mix pack system.
Upon mixing, the translucent resin tends to be bubble free and able to be safely squeeze poured into a mould or cable enclosure. The cured resin system provides excellent electrical and mechanical properties including thermal cycle and shock resistance. Solid Solutions cable jointing kits have a pedigree history of over 40 years continuous supply to Telstra Australia. Fulfilling the back of their epoxy cable jointing applications. The product has also been extensively used as a splicing kit in the cathodic protection industry.
Telephone line applications include cable core block on air core cable in HSJ closure, cable in HSJ closure, cables sheath seals in existing PVC open joints and cable air seals in pressurised cables
Visit http://www.epoxycablejointing.com/directions.htm for more information. Or simply call Solid Solutions on 03 9579 2044
|
|
| Telecommunications Epoxy Resin Cable jointing Kit 90gm |
Epoxy resin is used in a number of applications that include; Cable Core Block on air core cables in HSJ closures,
Underground Cable Joints, Cable Sheath Seal in existing PVC OJs and Cable Air Seal in pressurised cables. Some information in the STEPS outlined below is specific only to cable core blocking and cable sheath seal applications as follows:
An epoxy low viscosity two part resin filled waterproof encapsulation system. Packaged in an innovative mix pack system.
Upon mixing, the translucent resin tends to be bubble free and able to be safely squeeze poured into a mould or cable enclosure. The cured resin system provides excellent electrical and mechanical properties including thermal cycle and shock resistance. Solid Solutions cable jointing kits have a pedigree history of over 40 years continuous supply to Telstra Australia. Fulfilling the back of their epoxy cable jointing applications. The product has also been extensively used as a splicing kit in the cathodic protection industry.
Telephone line applications include cable core block on air core cable in HSJ closure, cable in HSJ closure, cables sheath seals in existing PVC open joints and cable air seals in pressurised cables
Visit http://www.epoxycablejointing.com/directions.htm for more information. Or simply call Solid Solutions on 03 9579 2044
|
|
| Telstra Grade Cable Jointing Kits |
Epoxy resin is used in a number of applications that include; Cable Core Block on air core cables in HSJ closures,
Underground Cable Joints, Cable Sheath Seal in existing PVC OJs and Cable Air Seal in pressurised cables. Some information in the STEPS outlined below is specific only to cable core blocking and cable sheath seal applications as follows:
An epoxy low viscosity two part resin filled waterproof encapsulation system. Packaged in an innovative mix pack system.
Upon mixing, the translucent resin tends to be bubble free and able to be safely squeeze poured into a mould or cable enclosure. The cured resin system provides excellent electrical and mechanical properties including thermal cycle and shock resistance. Solid Solutions cable jointing kits have a pedigree history of over 40 years continuous supply to Telstra Australia. Fulfilling the back of their epoxy cable jointing applications. The product has also been extensively used as a splicing kit in the cathodic protection industry.
Telephone line applications include cable core block on air core cable in HSJ closure, cable in HSJ closure, cables sheath seals in existing PVC open joints and cable air seals in pressurised cables
Visit http://www.epoxycablejointing.com/directions.htm for more information. Or simply call Solid Solutions on 03 9579 2044
|
|
| Ultra Fresh Latex Gloves |
Cost effective disposable latex gloves. Available in medium and large. Short term protection from polyesters, epoxies and polyurethanes. |
|
| Unimin Silica Flour |
Heavyweight extender for resins. High ratios of silica flour can be made to extend resins economically. Good abrasion resistance. |
|
| USG Duct Tube |
Braided air passage tube for embedding in aerated plaster moulds. Facilitates press clay part release by creating embedded air passages. |
|
| USG Hydrostone TB |
Very hard and tough, white gypsum cement. Very fluid when mixed at proper consistency and fast setting. High strength and resistant to abrasion and wear. Recommended for interior, high quality castings such as figurines. |
|
| USG RAYITE 200 |
Rayite 200 Spray able Machine Media is a new mineral-based material for prototyping, mold, pattern, and model making operations. It can be used for any size application, but is especially suited for large patterns and molds.
Rayite 200 spray able Machineable media is easily applied, in any thickness, to just about any structurally supported armature, such as expanded polystyrene or low density polyurethane foam. No more built-up, labour-intensive pattern construction just mix it , spray it and machine it.
|
|
| USG Ultracal 30 |
Precision casting plaster ideal for pattern work or when a hard accurate plaster is needed. |
|
| UV |
UV additive for improved exterior exposure of polyurethane liquid rubbers. Greatly reducing characteristic surface degradation caused by sunlight and other UV light sources.
Add 0.5% of the total weight of liquid mix prior to curing. |
|
| White Modelling Clay |
White, water based clay. Safe for use with all silicone rubbers. Smooth with water. Recommended for general mould making, for walls, bases and dams. Dries on exposure to air. |
|
|
|
© 2005 Solid Solutions, British United Industries (Vic) Pty Ltd East Bentleigh, Melbourne, Victoria, Australia |
|
|
|
|
|
